Flooring Calculator

Terminology

The following are definitions that apply to this calculator only. Please refer to the Terminology sections of the individual calculators that you are using to ensure correct material outputs.

Please note: This calculator does not calculate tile types that are commonly used in bathrooms. Please use the Interior Masonry calculator for this. This calculator is configured to calculate 12' roll out calculations only. Please visit our Products page for an unrestricted version of this application. Thank You.

Length - The distance as measured from corner to corner on the longest side of the room.
Width - The distance as measured from corner to corner on the shortest side of the room.

Width:
Length:

Most calculations automatically acquire a 10% waste factor. For Carpeting: You should not need more than 1 25' roll of Seam Tape for the average room. No waste calculated for carpet or sheet vinyl.

Need more information regarding roll out calculations for odd shaped rooms?

There is: square feet of floor in your room.

You will need to purchase: Linear feet of 12' wide carpeting or vinyl flooring.

You will need to purchase: 1' square carpet or vinyl tiles.

You will need to purchase: packages of hardwood or composite flooring. (Based on 24 Sq.Ft. per pack)

You will need to purchase: Lbs. of Hardwood flooring nails.(Based on 62 nails per Lb.)

You will need to purchase: Rolls of 15 Lb. felt under layment or foam under layment. (Dependent upon your sub floor composition).

You will need to purchase: linear feet of tack strip. (For Carpeting only).

As Seen On

CATAdjuster.org

Contractor City

Construction Education.com

Worldwide DIY Council

Find The Links.com